Yamatani Sangyo
Muranokajiya Peg Hammer Replacement Head Brass / Stainless Steel
Muranokajiya Peg Hammer Replacement Head Brass / Stainless Steel
受取状況を読み込めませんでした
Muranokajiya [Village Blacksmith]
Replacement Head for the Elise Stake Hammer
This is a replacement head for the Elise Stake Hammer
The brass head offers moderate strength and gradually develops a natural dark patina over time. This discoloration is an oxide layer, which also provides a degree of corrosion resistance, allowing you to enjoy its aging process
The stainless steel head is highly resistant to rust, which is its main advantage. It has appropriate strength and is less likely to damage pegs or the struck object
Please feel free to swap the heads according to your preference
Includes: Spring pin & Pin removal tool
How to Replace the Head
Please prepare a hammer such as a metal hammer, wooden mallet or rubber hammer (wearing work gloves is recommended)
-
Place the pin removal tool against the spring pin and strike it with a hammer to remove the pin
-
Remove the old head. If it is difficult to remove, twist it while applying lubricant into the gap
-
Insert the new head. If it is hard to insert, lightly tap it with a hammer
-
Align the hole in the main body with the hole in the head, insert the spring pin, and tap it in with a hammer
-
Finally, lightly tap the pin with the pin removal tool until it is fully seated in the body. The replacement is now complete
